[fordman]

Looking to put lipo in my mf2 just bought truck used but in the mail. Could someone measure the battery tray and see how many mm it is from the chassis to the bottom of the hold down strap. This way I can order my lipos before it gets here. Thanks

[Casper]

Any ROAR legal lipo will fit in this truck.

8.3.2.3.3 The maximum 2s 7.4v brick/stick case::
Length: 139mm
Width: 47mm
Height: 25.1mm

Being a truck you can go longer just not wider or taller due the battery strap.

[fordman]

that is what I was looking for is the height. Looking at turnigy 5.2 but are like 26 tall didn't know if that was to tall.

[Casper]

You can probably get away with a mm taller and still get the battery strap on no problem.

[fordman]

k thanks wasn't thinking at all missed the pack size you posted yeah 26mm should be fine. I'm not that good to even try a roar race.

[Casper]

I posted the ROAR sizes only because those were designed to keep batteries in the Nimh size equivalent. Since the battery tray for the XXX series was designed around the nimh battery anything within the ROAR limits will fit fine. That was my point.

[fordman]

yeah I got that but didn't see that the pack I was asking about was less than a mm different should be fine. thanks