PDA

View Full Version : Is this stuff good


MY_MINI-T_ROCKS
11-02-2009, 05:25 AM
Hi, i just bought a mini t off of ebay.It needed an esc but my freind had a nother.iwas woundering if a trinty monster stock for 1/18 scales is good because it came with that smasher tires and 3 team orion 1600 nimh batterys is all this good

freakofnature
11-02-2009, 06:13 AM
its a decent start i dont know if the stock esc will handle the motor or not i have a chubby in my mini-t and i use the esc out of an associated 18b and it works no problem.. but if u put an aftermarket esc in you will have to change out the 4 wire steering servo with a 3 wire servo and toss in a new rx unless your mini-t already has a 3 wire servo in it

MY_MINI-T_ROCKS
11-02-2009, 06:02 PM
its a decent start i dont know if the stock esc will handle the motor or not i have a chubby in my mini-t and i use the esc out of an associated 18b and it works no problem.. but if u put an aftermarket esc in you will have to change out the 4 wire steering servo with a 3 wire servo and toss in a new rx unless your mini-t already has a 3 wire servo in it

it think the stock esc can hadle it but if it can ill use the rc 18 esc and i have a reciver

freakofnature
11-02-2009, 06:16 PM
it think the stock esc can hadle it but if it can ill use the rc 18 esc and i have a reciver
plus if the stock servo has 4 wires you will need a hitec 3 wire servo for it