MRC Mods

[makakoa808]

Any needed mods for the Mini Rock Crawler? Mods for making her crawl better or work better or even just for fun?

I think I'm going to make a 1/10th scale servo mount...

[crawlin_and_riden]

to the top but also i mounted my batt on the rear axle

[freakofnature]

i had a set of cut n shut panthers made up for mine. u also have the pvc beadlock mod u can do, upgrade f/c/r diffs with metal lockers the plastic lockers suck

[Clovis Crawler]

i had a set of cut n shut panthers made up for mine. u also have the pvc beadlock mod u can do, upgrade f/c/r diffs with metal lockers the plastic lockers suck

The phrase "cut n shut" is new to me. What does that mean? I see Panthers as 2.2 sized tires. So I think it means to cut the tire to mini size. How is it done?

Kabuki the Clovis Crawler
Owner of the Losi Micro Rock Crawler, Mini Rock Crawler, Comp Crawler (w/lights) and Strike
I love BND and the 30 model memory Spektrum DX3R!

[freakofnature]

you basicly take a 2.2 and cut a section out of the center and glue it and then you section the side wall so it fits a 1.9 rim..if you look at the pic section of here and look at my mrc the tires that are on there were at 1 time 2.2. and depending on the tire you also gain a lil bit of clearence. :DThe phrase "cut n shut" is new to me. What does that mean? I see Panthers as 2.2 sized tires. So I think it means to cut the tire to mini size. How is it done?

Kabuki the Clovis Crawler
Owner of the Losi Micro Rock Crawler, Mini Rock Crawler, Comp Crawler (w/lights) and Strike
I love BND and the 30 model memory Spektrum DX3R!

[Josh]

How can i mount the battery on the back?

[freakofnature]

How can i mount the battery on the back?

i have a 2s 800mah parkflyer lipo its small and compact held to the rear with a velcro strap

[Josh]

Ok Thanks any ideas for the front, the wire is a tad too short, anyway around this without extending the wire?

[freakofnature]

Ok Thanks any ideas for the front, the wire is a tad too short, anyway around this without extending the wire?

how do you mean the wires are to short? i have my rx mounted on the tranny and i have more than enough wire length

[allrocksallday]

if you turn motor/tran around you then have enough wire to put batt on front serv.