Toe in / toe out

[jim]

Whats the best way to measure your front toe. I need to increse my off power tuning when I go into a corner??? My truggy has a petty good push going in , but dose ok with power on coming out.
Thanks in advance
Jim

[pballer2777]

With a RPM Monster Camber Guauge........I have one that I use on my LST2;)
http://www.rpmrcproducts.com/products/tools/gauges.htm#monster
http://www.rpmrcproducts.com/products/tools/hires/70950.htm

i have one of these and tried to ues it for toe. all i can say its a pita. i troed it against a wall. any advice to make it easier.

[Jr. Woodchuck]

i have one of these and tried to ues it for toe. all i can say its a pita. i troed it against a wall. any advice to make it easier.

if you can, find someone at the track with a hudy set up station, but personally i'll add/sub toe by trial and error. I'll move the steering links a 1/4 turn equally at a time. if you degreese toe out, you will need to go up in your epa to get the full affect of what you did, but if you increese toe out, make sure you adjust your epa's down before you go out. because you might hurt your servo if you don't.

[TrU Integra]

Whats the best way to measure your front toe. I need to increse my off power tuning when I go into a corner??? My truggy has a petty good push going in , but dose ok with power on coming out.
Thanks in advance
Jim



ask a local fast guys to eyeball it if you have no intention's of buying a set-up station...once you get the idea of what 1 degree or 2 degree looks like....you should be able to gauge it from there.