chuckybill
09-23-2009, 08:50 PM
I have placed other comments about this in other threads and gotten no response so I spose its time for a thread of its own.
I have tried to reprogram the first 3 profiles on my xcelerin 1/10th sensored esc only to find that once I change to another profile whatever changes I had made to that profile were lost and they default to what appears to be the factory settings. I have reprogramed the last 2 profiles (#'s 4 and 5) to my own liking and it appears they have maintained my settings even after viewing or choosing another profile to utilize.
So I am led to believe that the first 3 profiles can only have temporary changes made to them. Lasting in memory only untill you either power down, or change to another profile.
And,
If so then when will another qpc card be available with all the settings available to it. ie: 0 drag brake, and the various punch settings (initial acceleration).
As in my crawler I use various batteries depending on what I grab at the moment. whether 7.2, 8.4, or 9.6 volt ni/mh or 2s or 3s lipo and fiddling around trying to get it working correct in the field is nuts. so for now i kinda have to set profiles 4 and 5 for what batteries I have at the moment here on my pc, then go play.
Kinda nit piking I realize as it appears to be a very good unit with great potential and I like mine a lot. Just would be nice to set profiles up on the pc at home and then just go play and choose another profile if need be because of battery capacity change, etc. and not limited to just 2..
Now if I can also just keep oil in the front 2 shocks, rears aren't bad at all but the fronts weep terrible from the seals.
Have fun and keep the wheels down. ttfn
I have tried to reprogram the first 3 profiles on my xcelerin 1/10th sensored esc only to find that once I change to another profile whatever changes I had made to that profile were lost and they default to what appears to be the factory settings. I have reprogramed the last 2 profiles (#'s 4 and 5) to my own liking and it appears they have maintained my settings even after viewing or choosing another profile to utilize.
So I am led to believe that the first 3 profiles can only have temporary changes made to them. Lasting in memory only untill you either power down, or change to another profile.
And,
If so then when will another qpc card be available with all the settings available to it. ie: 0 drag brake, and the various punch settings (initial acceleration).
As in my crawler I use various batteries depending on what I grab at the moment. whether 7.2, 8.4, or 9.6 volt ni/mh or 2s or 3s lipo and fiddling around trying to get it working correct in the field is nuts. so for now i kinda have to set profiles 4 and 5 for what batteries I have at the moment here on my pc, then go play.
Kinda nit piking I realize as it appears to be a very good unit with great potential and I like mine a lot. Just would be nice to set profiles up on the pc at home and then just go play and choose another profile if need be because of battery capacity change, etc. and not limited to just 2..
Now if I can also just keep oil in the front 2 shocks, rears aren't bad at all but the fronts weep terrible from the seals.
Have fun and keep the wheels down. ttfn