chuckybill
09-20-2009, 07:09 AM
I purchased a 9500 esc a little while ago and so far like it very much. However I am pulling my hair out trying to get the esc to maintain the modified profiles I attempt to save to it..
Like for instance I set profile 1 up for 3s lipo, profile 2 for 2s lipo, and profile 3 for using nimh batteries but when I go back to profile 1 after saving and checking profile 3 that it kept my settings it has reverted back to the "default" settings, just as profile 2 went back to original settings and so on..
How do I get this thing to really "save" and "remember" what I program it for so that I can go out in the field with various batteries and play and only have to change esc profiles to maintain proper settings for the various batteries I'm putting in it..
Oh and the quick program card is useless for me for crawling usage. I generally program braking down to 10% on the pc as the comp crawler doesn't really need brakes, but the card only goes down to 20%. I turn off the drag brake on the pc but cannot with the qpc. I've found turning the throttle deadband down to 2 results in fairly quick response from forward to reverse most of the time..
My main issue is getting the esc to accept and maintain the changes in profiles via pc at home so that I don't need to reprogram things in the field (that I can't) with the qpc..
Any accurate help will be absolutely and wonderfully appreciated.
Like for instance I set profile 1 up for 3s lipo, profile 2 for 2s lipo, and profile 3 for using nimh batteries but when I go back to profile 1 after saving and checking profile 3 that it kept my settings it has reverted back to the "default" settings, just as profile 2 went back to original settings and so on..
How do I get this thing to really "save" and "remember" what I program it for so that I can go out in the field with various batteries and play and only have to change esc profiles to maintain proper settings for the various batteries I'm putting in it..
Oh and the quick program card is useless for me for crawling usage. I generally program braking down to 10% on the pc as the comp crawler doesn't really need brakes, but the card only goes down to 20%. I turn off the drag brake on the pc but cannot with the qpc. I've found turning the throttle deadband down to 2 results in fairly quick response from forward to reverse most of the time..
My main issue is getting the esc to accept and maintain the changes in profiles via pc at home so that I don't need to reprogram things in the field (that I can't) with the qpc..
Any accurate help will be absolutely and wonderfully appreciated.