PDA

View Full Version : need help with the xxx sct SET UP


n2deepmotorsports
01-13-2011, 07:33 PM
Hi guys im new to this forum stuff but any how my question is about the xxx sct ,seems like an awsome truck for stock class but needs a little work for open mod so my question is set up ill give you my home track discription. It is indoor track, temp usually between 40 and 50 degrees kinda chilly it is pretty tacky grip with clay in it, its got a long straight .then some quad jumps about 2 feet high with acouple sharp turns then a double and there 2 feet high then another sharp turn into a bunch of 1 foot woopee do,s and thats basic lay out. SO my question is set up whats a good starting point i would like to no what shock oil front and read ,springs rate to try ,and if someone would give me a set up sheet of all the changes with toe in ,camber, basically where everything should be as a good start for this track including like toe in in the back . Now i give you basically whats all in my truck , it has a 3300 kv motor ,lipo battery pack, 88 stock gear with a 21 pinion i put in and alum pivot block in the front im have on the way a xxx tcr full ball diff going in all graphit shock supports ,nose plate ,basically everything i can get my hands on for an upgrade from xxx tcr till losi releases the rest of xxx sct upgrades and DE rims and aka tires super softs. SO any help with all this would be awsome and any other up grades i can get to help would be great thanks for who helps me become the the man again in my class .

Trevor Clement
01-14-2011, 06:07 PM
Here is a link to Casey Peck's standard setup. I would start with that. If you drive it and feel it needs any tweeking, check out his thread and tell him what it's doing and what you want it to do. He's one of the best around for set up help.

Casey Peck's Standard XXX-SCT setup (http://www.losi.com/ProdInfo/Files/LOSB0106_Setup_Peck-Standard.pdf)

n2deepmotorsports
01-16-2011, 09:43 PM
thanks ill try that