Considering getting a micro

[Big-Bus7]

i am considering getting a micro for indoors running/ sometimes outside. i have a few q's
will these axle work on the micro highroller? (http://www.horizonhobby.com/Products/Default.aspx?ProdID=LOSB1507)
do the cars come with any tools?
does the highroller come with that stand thing?
aslo does the lipo battery by losi for the micros need a cutoff or does it not because it says it has some internal thingy but i am not sure.

-thnx in advance.

[themicrotman]

i am considering getting a micro for indoors running/ sometimes outside. I have a few q's
will these axle work on the micro highroller? (http://www.horizonhobby.com/products/default.aspx?prodid=losb1507)
do the cars come with any tools?
Does the highroller come with that stand thing?
Aslo does the lipo battery by losi for the micros need a cutoff or does it not because it says it has some internal thingy but i am not sure.

-thnx in advance.

get one get anyone you will love it it is also for outside!

[rc heaven]

hi there,
for sure i micro is great fun
it doesn't come with tools, but all you need is a couple of those realy small srcew drivers,
small pliers, magnifing glass, stuff like that to work on them.
the micro dt came with a stand, i don't know about the hi roller or if the parts interchange,
just need to check the part numbers for each truck to see if they are the same, then a side by side part compare is the best way.
the lipo battery doesn't need a protection as far as i know, i run mine with out.
the brushless motor is a ton more power than stock
no oil shocks makes it hard to handle brushless, so get those if you get brushless, it's worth it!
i can't wait to get my hands on one of those hi roller micros, the dt is soo low it has no real off road prowless, it's fine if you smooth out a place for it, with no gravel!!!
it goes good on 1/10 out door tracks but gets hard to see at the far end. lol
one lenth of the first lane in front of you at the track is like the baja 1000 for a micro

[Big-Bus7]

will the micro screw dirver, the truck, micro ramps, extra battery and charging adapter be all that i need to get up and rolling. I like that these trucks are so inexpensive compared to my Slash. (ihave like $800 in too it.)

[rc heaven]

that would be good to run , but i'm sure if you let youself go you could drop a few hundred bucks getting all the option availiable, check out integy for even more alu options.

[crawlin_and_riden]

i am considering getting a micro for indoors running/ sometimes outside. i have a few q's
will these axle work on the micro highroller? (http://www.horizonhobby.com/Products/Default.aspx?ProdID=LOSB1507)
do the cars come with any tools?
does the highroller come with that stand thing?
aslo does the lipo battery by losi for the micros need a cutoff or does it not because it says it has some internal thingy but i am not sure.

-thnx in advance.

you do not need those drive shafts it comes with nuts out of the box
also you do not need a lipo cutoff it has one built in

[Big-Bus7]

thanks for the info everyone, just on a side note intgey is a horrible company only things they make good is their cooling fans and heatsinks, + plus they look good. everything else is crap.In my opinion.