flyboy0413
09-06-2009, 06:26 PM
I recently purchased the 1/10th scale xcelorin S system. Works great if you nail the throttle, but if I advance the throttle slowly, the truck will lurch forward and then nothing. I can then advance to full throttle, with nothing happening. I've calibrated my throttle per the manual, but still no joy.
Reverse is the same. Works sometimes if you nail it, but if you do it slowly, the car will lurch, and then give up.
The speed control did register my endpoints, as I get the green light at full throttle and the red light at full reverse. I've also updated to the latest firmware version from the losi website. Please help!!!
Tony
Reverse is the same. Works sometimes if you nail it, but if you do it slowly, the car will lurch, and then give up.
The speed control did register my endpoints, as I get the green light at full throttle and the red light at full reverse. I've also updated to the latest firmware version from the losi website. Please help!!!
Tony