n1tronut
09-04-2009, 02:43 PM
Hi all, new to the site but need some help none the less. I did a search on the forums but didn't come up with answer to my question so thought I'd post.
I recently bought an Aftershock and all though the stock engine is fine wanted to put my Picco 26 outlaw in it to see how it performed but the center hole on the flywheel is to small to fit all the way on the crank, it stops at the threads. I decided to drilled out the hole just enough to fit all the way on the crank and then put the flywheel nut on with lock tight but the flywheels slipping now. Has anyone run into this problem? Is there another flywheel I can use. Is the flywheel for the LST2, or LST XXL the same? any help would be greatly appreciated. thanks:confused:
I recently bought an Aftershock and all though the stock engine is fine wanted to put my Picco 26 outlaw in it to see how it performed but the center hole on the flywheel is to small to fit all the way on the crank, it stops at the threads. I decided to drilled out the hole just enough to fit all the way on the crank and then put the flywheel nut on with lock tight but the flywheels slipping now. Has anyone run into this problem? Is there another flywheel I can use. Is the flywheel for the LST2, or LST XXL the same? any help would be greatly appreciated. thanks:confused: