Servo spacer on 8ight -E

[McKie]

Am I reading right that the servo spacers are not needed for all JR servos except the z9100s on the 8ight e 2.0 can someone look at there Instructions and tell me how they read it. seams like the arm sits a little high with the spacers

[Snowz]

From the instructions - JR All require no spaces, all but (DZ9100T/S)

so DZ9100T/S need the spacers

[McKie]

Ok thanks. The D in front kind of threw me off. the D must be referring to the fact that it is a digital servo. JR doesn't call it Dz9100. It's simply called z9100 s/t. Just wanted to make sure there wasn't 2 versions of the z9100 high torque /high speed servo. it also just seamed like the servo sat kind of high with the spacers.

[Casey Peck]

either way make sure you have clearance between the chassis and bottom of servo.