Clutch springs

[B-Lane]

Not really for new guys. I just want to know if you tried other clutch parts. The stock springs are too soft for what I am doing and I am really not sure the stock shoes are good enough? If you tried something different let me know

[painmaster]

Not really for new guys. I just want to know if you tried other clutch parts. The stock springs are too soft for what I am doing and I am really not sure the stock shoes are good enough? If you tried something different let me know

I also looking for a new cluch this cluch and spring worked ok in my xxxnt but to week for 10t

[Grimlock]

I tried a spring off a HPI MT and the spring broke in 5 minutes. I really hope they move to a 4 shoe clutch like on the 8ight. This is VASTLY superior in design and tunable for different types of engagement. Plus the aftermarket sells tons of options (shoes, springs, etc.) for this setup.

[StrangeRanger]

Knock on wood I've not had a reason to have the engine/clutch apart. But when I need to I'll be looking up some alternatives. I'm partial to the M2C clutch set ups. They've performed flawlessly on my Revo.

[painmaster]

Not really for new guys. I just want to know if you tried other clutch parts. The stock springs are too soft for what I am doing and I am really not sure the stock shoes are good enough? If you tried something different let me know

Not sure but herd the taxxas cluch and spring fit any one know for sure

[KCURTYTRID]

Not sure but herd the taxxas cluch and spring fit any one know for sure
try a stock t-maxx clutch. it worked in my ten-t.

[painmaster]

try a stock t-maxx clutch. it worked in my ten-t.

thanks i will

[swany1613]

what will the tmaxx clutch do for the ten-t? ......sorry i never really understood much of all of those little things

[painmaster]

what will the tmaxx clutch do for the ten-t? ......sorry i never really understood much of all of those little things

make it move again lol

[m2cracing]

Hi guys,
working on the 3 shoe clutch system for the 10t as we speak.
I am waiting on a truck to get here from a friend to check everything out.
I already know that the 1 way bearing is a pain and guys are going to want to go to
a starter box. And of course some guys are going to want to put a big block in the truck
just because they want it.
I will have to make a new motor mount , but it should take the standard 34mm flywheel.
I'll keep you posted on the progress.:)

[KCURTYTRID]

thanks i will

let me know how it works out for you.