Losi charger

[leo.griffith]

Whats up all I just purchase the new Losi charger @ lipo reciever pack for Losi 8b charger didnot come with balance port adapter for the reciever pack. does any body now the part # or dont worry about balaning the pack!!! help please

[leo.griffith]

Whats up all I just purchase the new Losi charger @ lipo reciever pack for Losi 8b charger didnot come with balance port adapter for the reciever pack. does any body now the part # or dont worry about balaning the pack!!! help please
Can anybody help

[Todd Hodge]

What is the part number of the charger you purchased?

[leo.griffith]

Thanks for responding LOSB9606

[Xcelorin_Brian]

The MultiPro Intelligent Balance Charger (LOSB9606) includes a balance adapter board that works for all Losi batteries. Our receiver lipo (LOSB9820) include a balance connector that plugs right into this board. You are trying to connect to the balance board using the white connector and not the red, correct?

[leo.griffith]

yes the white conecter the white connector is to small of plug for the board that came with charger yes i have losi reciever pack

[TagDragger]

I have one of the intellegent balance charger and the balance ports on the charger itself and the little board it comes with do not work with the 5000 Mah 7.4v 2 cell Losi lipo pack i have . Both are brand new , part #'s LOSB9606 and LOSB9861 . Any way to grt them to work together so i can balance my pack , or don't worry about balancing it ? The smallest plug on the board is a 4 prong plug , while the plug on the pack is a 3 prong .

[McKie]

I really think that they should post a sticky on these forums dedicated to lipo balancing connectors.

[leo.griffith]

I would realy like a anwser about the balance plug !!! please

[TagDragger]

Anyone have any answers ?

[madweazl]

I "think" this (http://www.amainhobbies.com/product_info.php/products_id/31789/n/Hyperion-Multi-Adapter-Balance-Board-2-6S-No-Cable-ProTek-Align-E-Flite-Venom) or this (http://www.amainhobbies.com/product_info.php/products_id/37106/n/ProTek-R-C-Multi-Adapter-Balance-Board-w-Cable-2S-10S-Kokam-Neu-Orion) will work but you'll have to do a little more research to make sure.

[TagDragger]

Yea they look like they would work , but why should i have to buy another company's board to balance charge my Losi packs on my Losi charger . I am thinking it was an oversight on their part and hope to get their attention so they can fix it for future items .

[TagDragger]

WOW , that is a total shocker to me . Not an answer about a product of theirs ? Losi , what's up with that ?

[REM578]

i have the original losi lipo charger that came with 4 different balance plug wires that work for the different losi batts. Is their some were you can buy just the small 3 wire one for losi 7.4 reciever pack balancing. Thanks

[Full Montee]

I use LOSB9651 for my 7.4V 5000mAh Losi Battery.
http://www.horizonhobby.com/Products/Default.aspx?ProdID=LOSB9651
I've also used the same connector for my friends Dynamite LiPo receiver pack.

[leo.griffith]

I bought those losb9651 and they do not connect in to the new charger!! they connect to the batteries just fine!! not the charger.

[REM578]

Thanks alot Full MONTEE that is exactally what i kneed.

[madweazl]

I've asked a few questions as of late; seems Losi hasnt been around in at least a week now.

[Full Montee]

leo.griffith try using a sharp hobby knife and taking the small tabs off the side of the LOSB9651 connecter that plugs into the charger. After this mod to the adapter this part works on both my E-Flite EFLC505 charger and my new LOSB9606 charger for my 2S Losi battery balance connecter.