Mini Revo LST

[makakoa808]

Here is my Mini LST with my prototype extended single servo MLST chassis.
With the extended chassis I found it's about as long as a traxxas mini e-revo,
also got the mini lst widetrack conversion kit.. which made it as wide as a traxxas
mini e-revo, so guess what I stuck the mini e-revo lid on...lol
But..not only does have a Mini Revo body..
it also comes compete with a 380 VXl mini e-revo Motor..

It's not done yet... this chassis is more for measurments and fine tuning maybe even a test run.
To finish her I will make an extended lower skull plate and have it bolt
on to the top chassis as well as the side rails for extra support in the center.

Check out my pics below...

Mini LST Extended Chassis with Mini E-Revo Body Top View
http://rccustomzone.com/rccz_pics/MLSTEx/MiniLSTExtPics/RCCZMLSTEXT_Revotop.jpg


Mini LST Extended Chassis with Mini E-Revo VXL 380 Motor
http://rccustomzone.com/rccz_pics/MLSTEx/MiniLSTExtPics/RCCZMLSTEXT_380.jpg


Mini LST Extended Chassis Chassis Top View.
http://rccustomzone.com/rccz_pics/MLSTEx/MiniLSTExtPics/RCCZMLSTEXT_ChasSide.jpg

Here are some pics of the My Mini LST 380 Motor Mount. On one side you can put a 380 size
motor on the other side you can put a stock size motor or mamba brushless..
Mini LST 380 Motor Mount pic1
http://rccustomzone.com/rccz_pics/MLST380/MiniLST380Pics/RCCZ_MLST380a.jpg

[notfastenuff]

what the ??? more details please, I think your onto something here.

[makakoa808]

Will have more pics soon. I'll put it next to my Mini E-Revo to compare with the Mini LST Extended Chassis..

I originally was making two seperate mods.. The Mini LST extended single servo chassis & the Mini LST 380 VXL Motor mount.. It's rare that I am able to make both prototypes at the same time.
So I decided to put them together..

The Mini LST Extended Chassis will work with the stock motor mount
and the Mini LST 380 VXL Brushless Motor Mount will work with the stock chassis.

[axial28rr]

revo and lst two words i dont see going to togetheter lol

[makakoa808]

revo and lst two words i dont see going to togetheter lol

lol true.. I originally was just gonna do a Mini LST Single Servo xtended Chassis thread..
But the Revo Body fit... So I went with it.. :D

I guess I should have just called it Mini LST Single Servo Extended Chassis Kit.

[Mini-JT]

Nice work :)

[makakoa808]

Nice work :)

Thanks Man Appreciate the compliment.