JRX-S 48 dp gearing?

[Mi4]

Hi
I've just picked up a 2nd hand JRX-S car (not the type R) to have a play with and I'm planning to drop a 10.5 T Xcelorin combo into it.

However all my other cars run a 48 dp pinion, hence I don;t have any 64dp ones. Rather than buy a load of new pinions I was wandering if it is possible to get a 48 dp spur for the JRX-S and if so, what size to get for a pinion range of 20 to 26 teeth as these are what I have spare.

Any help would be appreciated.

Thanks.

[swalker]

Mi4,

I have been running the 48p gears on my JRX-S and Type R curs ever since they first came out. The Spurs are totally interchangable between the 2 versions of the car.

Not to sure about what gearing you will need, you will need to experiment, but try to go for a steel pinion.

I used to go through pinions and spurs a lot with the 64p gears, but I used the 48p gears and steel pinions for more than 1.5 years and never needed to replace them on either my or my sons cars.

[Bret Pousson]

mi4 the best pinion spur combo should be 25 pinion and 90 spur or at least a decent starting point hope this helps