anybody

[bj brantley]

anybody know of any hop ups besides what losi has

[amd]

well i talked to a rep today after I had a (what wa thought to be) a failed rx, he says that there not much at all ... YET! He says that theres a "average line of parts" comming, and some other companys are in que at r&d on aftermarket goodies. And specificly no word of a 2speed from losi yet, but theres a roumor of a( possibly ofna) or other manuf. makin one.( I personally want reverse)

BTW turns out that the rep wanted me to send rx back ,I read that the dx3r had an unbind issue on powe up or leaving bind mode or on low voltage. I rebound and its fine.

I also found that 15ft high backflips are rather impressive,
I beat the truck like it owed me money, and it fought back vicously. Now,, I am a machinist, in school, and can make alot of cool stuff for the ten-t/
I will be making a set of aluminum front/rear susp. arms and, I have a pcvc(or whatever) and a few volts of power along with some acid..... a little color and VIOLA, my own, FREE pair of annodized gold arms.... I cant think of anything else id WANT metal. I was vry happy to see the alum shock towers.
I think I may lighten the clutch bell, possibly.... or angle drill the front face to create a fan effect to cool it. AND I am highly considering hand laying a copy of the plastic ming in Carbon fiber . I REALLLY am thinkin about a cnc set of aluminum bead lock or nice designed aluminum wheels for her..... and if I do the wheels, on cnc I will be selling them!!!! a dozen sets or so. A portion will go to my school and pay for matl.

[StrangeRanger]

well i talked to a rep today after I had a (what wa thought to be) a failed rx, he says that there not much at all ... YET! He says that theres a "average line of parts" comming, and some other companys are in que at r&d on aftermarket goodies. And specificly no word of a 2speed from losi yet, but theres a roumor of a( possibly ofna) or other manuf. makin one.( I personally want reverse)

BTW turns out that the rep wanted me to send rx back ,I read that the dx3r had an unbind issue on powe up or leaving bind mode or on low voltage. I rebound and its fine.

I also found that 15ft high backflips are rather impressive,
I beat the truck like it owed me money, and it fought back vicously. Now,, I am a machinist, in school, and can make alot of cool stuff for the ten-t/
I will be making a set of aluminum front/rear susp. arms and, I have a pcvc(or whatever) and a few volts of power along with some acid..... a little color and VIOLA, my own, FREE pair of annodized gold arms.... I cant think of anything else id WANT metal. I was vry happy to see the alum shock towers.
I think I may lighten the clutch bell, possibly.... or angle drill the front face to create a fan effect to cool it. AND I am highly considering hand laying a copy of the plastic ming in Carbon fiber . I REALLLY am thinkin about a cnc set of aluminum bead lock or nice designed aluminum wheels for her..... and if I do the wheels, on cnc I will be selling them!!!! a dozen sets or so. A portion will go to my school and pay for matl.

How about machining a nice motor mount like they have for the 8 so you can remove the motor w/out mussing up the gear mesh etc? I'll take one :)
j

[thelbz]

id like a set of cnc'd set of beadlocks that would be fantastic if the price was right

[Grimlock]

How about machining a nice motor mount like they have for the 8 so you can remove the motor w/out mussing up the gear mesh etc? I'll take one :)
j

I wonder if one right off the 8ight would work. I should be getting an 8ight this week so I will be able to test a lot of these things.

I picked up some DE Racing skid plates for the 8ight (in advance) and they look like they will fit right on to the Ten-T. I do not have access to my Ten-T at the moment or I would test fit them.

[bj brantley]

i just want some diff stuff i don't care what it is a better bat for the starter would be nice