Imperial electric screwdriver bits.

[EddyStowaway]

Hi there,

Does anybody know where to get some Imperial electric screwdriver bits from to suit losi?

Had a good search on the web and i cannot source

Adrian:confused:

[plod]

EDS does some

Available seperately or in a pack

http://edsracingproducts.com/POWER-TOOL-TIP-SET-4PCS.-ALLEN/M/B000XASU7W.htm

[Casper]

MIP makes some of the best allen tips on the market.

http://search.horizonhobby.com/index.jsp?D=mip+speed&Ntt=mip+speed&N=0&sid=12371D9F8216

I don't know of a kit you can buy but you can get the 3/32 and the 1/16 which covers most all of the common screws. 2.5 is only used for motor screws and .050 is for some set screws which you should do by hand anyway.

Ofna makes this set that is pretty popular as well

http://www.horizonhobby.com/Products/Default.aspx?ProdID=OFN93129

[Lars Johnson]

Dynamite does too:

DYN2920 (http://www.dynamiterc.com/Products/Default.aspx?ProdID=DYN2920)

and individually:
.050 - DYN2921 (http://www.dynamiterc.com/Products/Default.aspx?ProdID=DYN2921)
1/16 - DYN2922 (http://www.dynamiterc.com/Products/Default.aspx?ProdID=DYN2922)
5/64 - DYN2923 (http://www.dynamiterc.com/Products/Default.aspx?ProdID=DYN2923)
3/32 - DYN2924 (http://www.dynamiterc.com/Products/Default.aspx?ProdID=DYN2924)

3/32 With ball end as well:
DYN2945 (http://www.dynamiterc.com/Products/Default.aspx?ProdID=DYN2945)

[Rodalosi]

Horizon has some for sure.

[EddyStowaway]

Thanks for that guys.

I feel a bit stupid now because i work in a hobby shop that sells all those brands but did not realise they made them:o

Ill get them ordered in the morning.

thanks to all

Adrian :D

[Neobart]

Also the driver with bits that come with the race rollers also fit cordless screwdrivers. :cool:

BTW. Adding that tool was a brilliant idea. And they are very high quality as well.

[crawlin_and_riden]

EDS does some

Available seperately or in a pack

http://edsracingproducts.com/POWER-TOOL-TIP-SET-4PCS.-ALLEN/M/B000XASU7W.htm

canadian tire home depot home hardware any hardware store

[TrU Integra]

canadian tire home depot home hardware any hardware store



CT HD Nor any local hardware store will have the bit's we need.....the bits we use a hardened tool steel and put up to the abuse we put them through....the Crappy allan bit's you buy at the hardware store WILL not cut it for RC use....they round out real fast and end up messing up your hardware....buy the Proper Name brand tools specifically for our car's and you wont have any problems.

[rc heaven]

you could get some from mac tools.
i just got a master set. i was looking for a while and decided with that to have every bit possible always at hand.
way too many bits that i'll never need...but it has every one i do need, and garantied for life not to break, so if one gets worn you need to replace it. i use mac tools on real cars and they are tough!!!
don't bother with crappy tire, it will end up costing you way more in the long run. first stripped screw avoided and it's paid for it self.

[TrU Integra]

IMO Mac tools are OVER priced and not any better then what's out there....our Tools from RC mfg's are alot tougher then any Mac T handle wrench ive ever seen.....i cant count how many of those Mac's ive seen Strip out either the wrench or the hardware.....IMO you cant beat the "meant for" RC tools.

[rc heaven]

aaahhh mmmaaaaannn.
i'm a sucker for tools. i got a bunch of hand driver's in a bag, but thought a kit would be neater

[TrU Integra]

aren't we all sucker's for tools ? :D

I got WAY more then i need to do the job. :p

http://i150.photobucket.com/albums/s102/davidmoxley123/Misc/DSC_0008.jpg

[Neobart]

I'm quite jealous of your Mugen tools Integra. The 2.5mm ball-end I have is my most comfortable wrench to use. Very tuff stuff. :)

[Y2KGTP]

I have been using the Ofna tips for a while with a B&D driver....

http://img208.imageshack.us/img208/4752/img4722i.jpg