savox tapper screw needed and 2 other screws.losi 8.servo screws needed.heres pics

[macro junkie]

http://i266.photobucket.com/albums/ii245/macrojunkie/DSC_0032.jpg


now pics of mine and what i need..the pic above is from another members set up.

i have a savox SC-1258...the screw u see that screws in the servo arm is what i got with it..i would rather have the same type of screw as avove..is this posiball?

any way i need the other 2 screws that go on either end..the ones i got dont fit so i rekon some where along the line i have lost them.i like the washers to on that pic above.

losi 8 2.0 race roller

http://i266.photobucket.com/albums/ii245/macrojunkie/IMG_8527.jpg

http://i266.photobucket.com/albums/ii245/macrojunkie/IMG_8528.jpg

[macro junkie]

my losi is coming together..2-3 screws and its all going to work. :)

http://i266.photobucket.com/albums/ii245/macrojunkie/IMG_8529.jpg

[macro junkie]

a6254 ?

a6232 ?

[Neobart]

Throw that phillips head screw that comes with it far away. I had one were the head sheared of, meaning I had to get a new set of gears for it. There was no way the screw could be removed.

It's a 5-40 thread screw. I use flatheads with a washer.

[macro junkie]

what is a 5-40 thread screw?im in the uk..any links u can give?

[losiracer410]

all the screws you will ever need should be in a complete screw kit for the losi 8ight

[TrU Integra]

the 2 screw's on either side are the stock linkage screw's with the kit...the 2 part #'s you have listed are correct.

the Style of screw you want is called a Cap Head......the flush to surface are called countersunk or flat head...the round head is called a button head....just to let you know for future reference. :)

http://www.amainhobbies.com/advanced_search_result.php?keywords=Losa6254&x=0&y=0

http://www.amainhobbies.com/advanced_search_result.php?keywords=Losa6232&x=0&y=0

[macro junkie]

all the screws you will ever need should be in a complete screw kit for the losi 8ight

i lost them hence the thread

[macro junkie]

the 2 screw's on either side are the stock linkage screw's with the kit...the 2 part #'s you have listed are correct.

the Style of screw you want is called a Cap Head......the flush to surface are called countersunk or flat head...the round head is called a button head....just to let you know for future reference. :)

http://www.amainhobbies.com/advanced_search_result.php?keywords=Losa6254&x=0&y=0

http://www.amainhobbies.com/advanced_search_result.php?keywords=Losa6232&x=0&y=0

thank you.a guy talking sense.:)