PDA

View Full Version : my car show me your best jumps

themicrotman
08-28-2009, 06:26 PM
heres my car jumpin show me yours!!!!!!!!!!!!!!!!!!!!!
axial28rr
08-28-2009, 07:54 PM
http://www.youtube.com/watch?v=Pmh9N7VVCSo

i am the aftershock with black wing i made this a week ago of a track meet :)
themicrotman
08-28-2009, 08:14 PM
http://www.youtube.com/watch?v=Pmh9N7VVCSo

i am the aftershock with black wing i made this a week ago of a track meet :)

NiCe!!!!!!!!!!!!!!!!!!!!!
where is that again?!
axial28rr
08-28-2009, 08:59 PM
NiCe!!!!!!!!!!!!!!!!!!!!!
where is that again?!

its in Canada.On

Durham Region
located in Bowmanville.ON
the track is called

D.O.R.C.

http://www.dorc.ca/
Durham Offroad RC Club
moby
08-29-2009, 12:49 AM
niiice one's
with a bit off luck we will make some pics to
i'll post them right away lol
moby
08-29-2009, 06:42 AM
some with the mini LST, some with xxx-4 and 1 with xxx-t MF2
themicrotman
08-29-2009, 08:09 AM
nice ilove em people
keep em' cumin!
makakoa808
09-03-2009, 08:53 PM
Here is my Mini LST Ramp Jumping video


<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/2rbJM6wznXk&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/2rbJM6wznXk&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/InVGS_7D48s&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/InVGS_7D48s&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
themicrotman
09-07-2009, 08:57 AM
Nice!!!!!!!!!!!!!!!!!!!!!!!!!!!
ahDuckit
09-09-2009, 05:29 PM
My Mini-T getting a bit of air time :)

Hereford Micro Open '08
http://www.brcamicro.org/jpg/170808/170808-16.jpg

Stafford '07 Micro National
http://www.brcamicro.org/jpg/071007/071007-02.jpg

We use to go to hereford all the time to go grocery shopping at Upper Hereford. We lived in Wickum (sorry i know i didnt spell that right).
themicrotman
09-13-2009, 06:55 AM
keep posting!!!!!!!!!!!!!!!!!!!!!!!!
mc7
12-02-2009, 07:36 PM
I got my stock Micro Highroller to clear 14 cans and land cleanly with the 10-tooth pinion gear. I've recently changed the 10-tooth out for the 14-tooth, so I'll have to take it back outside with the same jump and see if it will fly farther.
mc7
12-13-2009, 09:07 PM
This is the 14-tooth pinion--top speed is about 14mph and it will easily clear 22 cans now--it jumps far enough and high enough that you can tip it forward and back in the air using the throttle.
mc7
03-26-2010, 12:57 PM
This is a Micro Highroller with a 2S lipo, 10250Kv motor, and 14-tooth pinion.
Mac
03-28-2010, 02:26 PM
Love my 2.0 Truggy!!
http://i334.photobucket.com/albums/m401/David-McLean/_GLN7452_1200.jpg
mc7
03-29-2010, 11:01 AM
I just punched some numbers into my calculator and figured out that my Micro HR sustained a force of 7.54g going off the ramp at 26.6 mph. If I upgrade to the 3S lipo and take the truck off the same ramp at full speed, it will cause a force of 30g. Time for a bigger ramp. (The bigger the ramp, the lower the g-force.) (The truck didn't break under 7.54g because it only weighs 133 grams. 133 grams x 7.54 = 1 kilogram/2.2 pounds.)