clutch set up for 8ight B 1.0

[T.Davis46]

I have an 8ight buggy 1.0 and was wondering what a good overall clutch set up was for the buggy. I have read about a combo between carbon and aluminum shoes along with gold and silver springs. Any advice would be great..

[TrU Integra]

I have an 8ight buggy 1.0 and was wondering what a good overall clutch set up was for the buggy. I have read about a combo between carbon and aluminum shoes along with gold and silver springs. Any advice would be great..



what motor do you run ?

[T.Davis46]

what motor do you run ?

I have the dynamite mach 2 (.21)...I just bought 4 losi composite shoes and green and gold springs...thought I would try those out and see how they do...

[TrU Integra]

I have the dynamite mach 2 (.21)...I just bought 4 losi composite shoes and green and gold springs...thought I would try those out and see how they do...



that combo should work just dandy....make sure to clean and inspect the clutch every once in a while and swap the alum shoes with the comp shoes after a gallon or so......and while you at it replace the shoe pins or inspect for wear on the alum pins at least.:)

[T.Davis46]

that combo should work just dandy....make sure to clean and inspect the clutch every once in a while and swap the alum shoes with the comp shoes after a gallon or so......and while you at it replace the shoe pins or inspect for wear on the alum pins at least.:)

will do...I also got the pin replacement pack so I could just replace them while I had it apart...thanks for the advice....I'm really great with mx bikes, but just getting back into r/c and have to learn how everything works again..